Chamber and fixture trolley work separately without affecting each other and can lower down the capacity loss in case of fault;
Vacuum leak rate of chamber is within 4 PaL/s, and ultimate vacuum is 1 Pa；
Every layer of hot plate of fixture trolley is controlled separately and it can assure the temperature of hot plate ± 3°C ;
Mirror reflectors covered with heat-insulation cotton outside are distributed inside the chamber and outer wall temperature of chamber is 5°C higher than the room temperature at the most;
Maintenance station is equipped to realize offline maintenance of fixture trolley;
Operate in a closed environment, It only needs to feed dry air in the unloading and cooling areas and no drying room is required, so as to lower down energy consumption;
Cell baking information is associated with OR code and uploaded to MES system.
Drawer-type fixture for multi-layer heating plate; blade battery is placed on the heating plate vertically. Vertical side plate of the fixture can not only locate the battery, but also help to accelerate the battery temperature rise. Battery is bonded with the heating plate and thus can be heated up to the required temperature quickly.
Equipment dimension: W= 30000 mm; D= 9000 mm; H= 4500 mm
Compatible battery size: L= 150 ~ 650 mm; H= 60 ~ 250 mm; T= 10 ~ 25 mm
Moisture content: < 150 PPM
Process time: 300 ~ 480 min
Equipment eficiency: 30 PPM
Vehicle battery capacity: 700 ~ 800 PCS
Allowable number of vacuum chambers: 6 ~ 12 PCS
Drawer-type fixture for multi-layer heating plate; large pouch battery is placed on the heating plate vertically. Vertical side plate of the fixture can not only locate the battery, but also help to accelerate the battery temperature rise. The special-purpose air bag supporting mechanism locates the air bag and helps to realize automatic loading and unloading.
Equipment dimension: W= 30000 mm; D= 9000 mm; H= 4500 mm
Compatible battery size: L= 150 ~ 650 mm; H= 60 ~ 250 mm; T= 10 ~ 25 mm
Moisture content: < 150 PPM
Process time: 300 ~ 480 min
Equipment eficiency: 30 PPM
Vehicle battery capacity: 700 ~ 800 PCS
Allowable number of vacuum chambers: 6 ~ 12 PCS
Drawer-type fixture for multi-layer heating plate; square-shell battery is placed on the heating plate vertically. Battery is provided with spacers for location and battery spacing is small, which can increase the space utilization and heat efficiency and improve the capacity of small size battery. Battery is bonded with the heating plate and auxiliary heating are added surrounding it, thus it can be heated up to the required temperature quickly.
Equipment dimension : W=34000mm;D=7200mm;H=3600mm
Compatible battery size : L=100~220mm ; H=60~230mm ;T=20~90mm;
Moisture content : <150PPM
Process time :240~560min
Equipment efficiency:40PPM
Vehicle battery capacity :220~840PCS
Allowable number of vacuum chambers:5~20PCS
Drawer-type fixture for multi-layer heating plate; cylindrical batteries are fixed onto the heating plate vertically via the positioning fixture and side auxiliary heating plate can accelerate the temperature rise of cells.
Equipment dimension: W= 30000 mm; D= 9000 mm; H= 4500 mm
Compatible battery size: L= 150 ~ 650 mm; H= 60 ~ 250 mm; T= 10 ~ 25 mm
Moisture content: < 150 PPM
Process time: 300 ~ 480 min
Equipment eficiency: 30 PPM
Vehicle battery capacity: 700 ~ 800 PCS
Allowable number of vacuum chambers: 6 ~ 12 PCS